Small block chevy valve guide clearance bronze "737"

Most stock small-block Chevy springs, for example, limit total valve lift to no more than about .500 inch. This is why checking these clearances is so important. The Extras

Trick Flow® DHC™ 175 Cylinder Heads for Small Block Chevrolet TFS-30210006. Cylinder Head, DHC™ 175, Fast As Cast®, Assembled, 1.470 in. Springs, Accessory Bolt Holes, Small Chevy, Each GEN1 350 Valve train specs? hansw3. I love my Chevy Chevette! Posts: 6. Joined: 09/07 Anybody know where there are specs on valves and valve seats for small block chevy 350 Gen1? They don't recommend the bronze ones. Either this will be a job on my bridport at home or I won't replace the JEGS Cast Iron Vortec Cylinder Head for Small Block Chevy with a 170cc Intake Runner just glad I looked before just bolting them on. The heads do have some type of valve guide liner. liners. No hd anything. The heads are cheap rebuilder grade promax heads that did not have enough Chevy-Small Block; Valve guide repair; Thread: Valve guide repair : Tweet : Page 2 of 2 First 1 2. Jump to page: Bronze guide helicoil repair. Good for 100,000 miles. Done the same as knurling pretty much, and works well. Here is a link to explain that procedure a little more. Shop 350 Chevy Small Block V8 Valve Guides and get Free Shipping on orders over $99 at Speedway Motors, the Racing and Rodding Specialists. 350 Chevy Small Block V8 Valve Guides in-stock with same-day shipping. Looking to see if anyone has a procedure for checking valve guide clearance by measuring the end play at the top of the valve. I have a set of X heads that are on the bench. The valves hold a good vacuum and i will be disassembling them for a clean up, some new springs and seals. Just don't know if i need to have the guides done. Also be aware that there are both 3/8-inch and 7/16-inch studs available for a small-block Chevy. Most stock or mild performance applications use a 3/8-inch stud. The best studs come from ARP. Valve Guide, Intake or Exhaust, Mangan