Laser 2 rigging manual

Laser 2000 Capsize Technique Th e Laser 2000 rigging instructions are a guide to rigging your boat. Laser Rigging Manual.tif Author: 802016926@BTG171082 Created Date: 4/20/2006 12:00:17 PM se read the manual before rigging and sailing your Laser The Laser Stratos rigging instructions are a guide to rigging your 13-21 a. RIGGING A LASER FOR RACING 7 1.1 Ropes 7 1.2 Clew tie-down 7 1.3 Centreboard and Rudder 10 1.4 Mainsheet 10 this manual be set as the text book which should be read by those enrolled in the course in the weeks prior to it taking place. Hopefully, all the participants would then The rigging manual outlines the basic method of getting the boat from the packages onto the water. Here I have tried to add some refinements to make life easier for those who wish to race. The Laser 2 is rigged very simply, but care over detail saves a lot of disappointment and upset on the race track Mast LASER FUN RIGGING MANUAL The Laser Fun Rigging Instructions are a comprehensive guide to rigging your Laser Fun. Due to production supplies certain parts may be slightly modified to those shown. This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the purpose of learning to sail a dinghy. Hounds: the connecting pointon the mast for rigging that gives it support Halyard: a rope or wire used ta or lower sais. Hatyzrd rack: a focifred rack over which a halyard can be tensioned io control tension the sail luff. Jib she* the rope used to controi ihe position at the jib when under sail. Laser 2 Rigging Guide. The Laser 2 is a two person dinghy, which comes in various different configurations, some with trapeze, some with spinnakers, some with both. There are a range of names for them, from Regatta, Fun, and Fun New Wave amongst others. With an ideal crew weight between 120-170kg, it's an ideal boat for mixed crews and younger lawn or the deck of your Laser or even the carpet inside the boathouse (if there is room)